BMW X4 G02 / X4M F98 Clear Black Venom Custom Taillights (2018-2021)

Description

BMW X4 G02 Tail Lights — Black Venom Style (X4 + X4M, Pre-LCI)

Upgrade your 2018-2021 BMW X4 G02 or X4M F98 with these handcrafted custom BMW X4 G02 tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner housing. The result is a sharper, more modern look that transforms the rear of your X4 SUV coupe while keeping a fully factory fit and finish. Looking for a BMW X4M F98 tail light upgrade or a custom rear-end for your G02 SUV coupe? These BMW X4 G02 tail lights are built specifically for the pre-LCI G02 (2018-2021) body style and are fully interchangeable with the high-performance X4M F98 variants of the same generation.

Why Choose Our BMW X4 G02 Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original BMW connectors, no coding, no ISTA adaptation, and no wire splicing required on US-spec vehicles equipped with the factory LED tail lamps.
• BMW X4 G02 Custom Taillights, Done Right — Built on original used BMW tail light housings, not cheap aftermarket replica shells. That means factory-accurate mounting geometry, original gasket profiles, and a clean OE appearance from the inside out — exactly what serious BMW X4 G02 custom taillights buyers expect.
• Fixes the Factory Condensation Problem — Stock G02 tail lights use an OEM butyl seal that hardens and shrinks with age, which is the well-documented cause of moisture and condensation inside the tail light on Xoutpost and Bimmerpost. Our handcrafted BMW X4 G02 tail lights are fully resealed with a professional-grade automotive sealant that does not harden, shrink, or fail with thermal cycling — no more foggy lenses, no more water inside the housing.
• BMW X4 G02 Black Tail Lights Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior creates the premium OEM-plus look that BMW X4 G02 Black tail lights buyers love, and it pairs perfectly with the X4’s coupe-SUV roofline and aggressive stance.
• X4M F98 Compatible — Built on the same OEM housing shape as the G02 platform, so they fit both standard X4 models and the high-performance X4M F98 of the same pre-LCI generation, including the sequential turn signal module.
• Factory Seal Quality — Each unit is pressure-tested and visually inspected before shipping to prevent moisture, fogging, or condensation.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

Looking for BMW X4M F98 Clear tail lights that match the standard G02 clear-lens look without going aftermarket? These modified BMW X4 G02 tail lights are designed to fit:

• BMW X4 G02 (pre-LCI) — 2018, 2019, 2020, 2021 — xDrive30i, xDrive30d, M40i, M40d
• BMW X4M F98 (pre-LCI) — 2019, 2020, 2021 — X4M Competition, X4M
• Plug type: US / EU / CN versions have different connectors — please confirm your market version with us before shipping so we send the correct harness.

Important — Please confirm before ordering:

• This listing is for the pre-LCI G02 tail light housing only. The 2021+ LCI facelift BMW X4 uses a completely different tail light shape and is not compatible with this listing.
• The X4M F98 of the same pre-LCI generation is fully compatible.
• Plug type varies by region (US / EU / CN). Confirm your market version before ordering so we ship the correct connector.

BMW X4 G02 Tail Lights Installation

Our BMW X4 G02 tail light upgrade is designed for a hassle-free installation. The process takes roughly 30-60 minutes per side with basic hand tools:

1. Open the rear hatch and remove the side trunk trim panels to expose the tail light mounting bolts.
2. Unplug the factory harness connector and remove the mounting bolts.
3. Carefully pull the OEM tail light straight out of the body.
4. Transfer any region-specific bulb holders / control modules to the new housings if applicable.
5. Seat the new BMW X4 G02 tail light, reinstall the bolts, reconnect the harness, and test all functions (running light, brake, turn signal, reverse, sequential module if equipped) before reassembling the trim panels.

No ISTA coding, no module re-flashing, and no wire splicing is required on US-spec G02 vehicles that came with the factory LED tail lamps. Plug the harness in and the lights work as intended.

Quality Promise

Each pair of BMW X4 G02 tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. We pressure-test every sealed unit and visually inspect every finished lens before it leaves our workshop, so the lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit with professional-grade sealant, and guarantee function.

FAQ – Frequently Asked Questions

Will these BMW X4 G02 tail lights actually fix the condensation / foggy lens problem on my X4?

Yes — that is one of the main reasons owners upgrade from the stock G02 tail lights to our handcrafted set. The factory BMW tail lights on the G02 platform are sealed with an OEM butyl rubber gasket that hardens and shrinks after a few years of thermal cycling. Once that seal fails, you get the classic moisture / fogging / standing water inside the lens that BMW owners report constantly on Xoutpost and Bimmerpost. Every set of our BMW X4 G02 tail lights is resealed with a professional-grade automotive sealant that does not shrink, harden, or fail with age — so the moisture problem does not come back. We pressure-test every unit before it leaves the workshop.

Are these BMW X4 G02 tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM BMW tail light cores, not aftermarket replica shells. The starting point is an original BMW tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line — none of which a cheap aftermarket shell can replicate. Every competitor currently selling a “BMW X4 G02 clear tail light” in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.

Will these BMW X4 G02 tail lights work without coding?

Yes — on US-spec G02 / F98 vehicles that came with the factory LED tail lamps, our BMW X4 G02 tail lights install as a true direct plug-and-play replacement. The original connector pins line up, the lighting functions (running light, brake, turn signal, reverse, sequential module if present) work the moment the harness is reconnected, and no ISTA coding, no ISTA adaptation, no module re-flashing, and no control-module swap is required. We have confirmed this across multiple G02 and F98 builds where every lighting-related module reported zero fault codes after the swap. The same applies whether you are upgrading regular X4 G02 or BMW X4M F98 Clear tail lights — both plug straight into the original BMW harness with no module work.

Do these BMW X4 G02 tail lights also fit the X4M F98?

Yes — the X4M F98 of the pre-LCI generation (2019-2021) uses the same outer tail light housing shape as the standard X4 G02, so these BMW X4 G02 tail lights fit both the regular X4 and the X4M variants of the same generation. The internal LED board we use is the standard factory LED module, so your factory sequential turn signal and dynamic brake functions continue to work just like stock. If you specifically need a BMW X4M F98 tail light replacement (not just a regular X4 G02 swap), this listing is the right fit — same mounting, same plug, same functions. Please double-check your build year before ordering — the 2022+ LCI X4M F98 uses a different tail light housing and is not compatible with this listing.