Land Rover Range Rover L405 Clear Black Venom Custom Taillights (2018-2022 LCI)

Description

Range Rover L405 Tail Lights — Black Venom Style (2018-2022 LCI)

Upgrade your 2018-2022 Range Rover L405 (LCI facelift) with these handcrafted custom Range Rover L405 tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner bezel. The result is a sharper, more modern look that transforms the rear of your flagship Range Rover SUV while keeping a fully factory fit and finish. Looking for Range Rover tail lights or a true Range Rover custom taillights build for your full-size SUV? Searching for a clean Range Rover light upgrade that does not look like every other eBay listing? Hunting for Range Rover clear tail lights that keep the factory LED signature? These Range Rover L405 tail lights are built specifically for the LCI facelift L405 (2018-2022) generation and are not compatible with the pre-LCI 2013-2017 L405.

Why Choose Our Range Rover L405 Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original Land Rover connectors, no coding, no SDD / Topix adaptation, no module re-flashing, and no wire splicing required on US-spec L405 vehicles equipped with the factory LED tail lamps.
• OEM Core Base — Built on original used Land Rover tail light housings, not cheap aftermarket replica shells. That means factory-accurate mounting geometry, original gasket profiles, and a clean OE appearance from the inside out — none of which a cheap aftermarket shell can replicate on a flagship Range Rover chassis.
• Fixes the Factory Condensation Issue — Stock L405 tail lights are prone to moisture, fogging, and standing water inside the lens as the factory seal ages. Our handcrafted Range Rover L405 tail lights are fully resealed at the factory joint with a professional-grade automotive sealant that does not shrink, harden, or fail with thermal cycling — so the moisture problem does not come back.
• Range Rover Smoked Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior is exactly the Range Rover smoked tail lights look Range Rover owners want — sharper, more modern, premium rear-end styling that pairs perfectly with the L405’s clean, restrained SUV-coupe proportions.
• SV Autobiography-Inspired Look — This Black Venom treatment gives your L405 the same sharp, premium rear-end styling that the high-end SV Autobiography trim carries — without the SVAutobiography price tag.
• Factory Seal Quality — Each unit is pressure-tested and visually inspected before shipping to prevent moisture, fogging, or condensation.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

Looking for Range Rover smoked tail lights or a Range Rover clear tail lights swap on your LCI L405? These modified Range Rover L405 tail lights are designed to fit:

• Range Rover L405 (LCI Facelift) — 2018, 2019, 2020, 2021, 2022 — Vogue, HSE, Autobiography, SVAutobiography, Fifty, Westminster, SVR, SVAutobiography Dynamic
• Body style: 4-door full-size luxury SUV
• Plug type: US / EU / CN / UK versions have different connectors — please confirm your market version with us before shipping so we send the correct harness.

Important — Please confirm before ordering:

• This listing fits the LCI facelift L405 (2018-2022) only. The pre-LCI L405 (2013-2017) uses a completely different tail light shape with a different LED signature and is not compatible with this listing.
• The 2023+ L460 (5th-generation Range Rover) is a completely new platform with a different tail light housing and is also not compatible with this listing.
• Plug type varies by region (US / EU / CN / UK). Confirm your market version before ordering so we ship the correct connector.

Range Rover L405 Tail Lights Installation

Our Range Rover L405 tail light upgrade is designed for a hassle-free installation. The process takes roughly 30-60 minutes per side with basic hand tools:

1. Open the rear hatch and remove the side trunk trim panels to expose the tail light mounting bolts.
2. Unplug the factory harness connector and remove the mounting bolts / nuts.
3. Carefully pull the OEM tail light straight out of the body.
4. Transfer any region-specific bulb holders / control modules to the new housings if applicable.
5. Seat the new Range Rover L405 tail light, reinstall the bolts, reconnect the harness, and test all functions (running light, brake, turn signal, reverse, dynamic module if equipped) before reassembling the trim panels.

No coding, no SDD / Topix adaptation, no module re-flashing, and no wire splicing is required on US-spec L405 vehicles that came with the factory LED tail lamps. The body control module recognizes the original LED load profile and flags zero fault codes out of the box.

Quality Promise

Each pair of Range Rover L405 tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. We pressure-test every sealed unit and visually inspect every finished lens before it leaves our workshop, so the lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit with professional-grade sealant, and guarantee function.

FAQ – Frequently Asked Questions

Will these Range Rover L405 tail lights fit my 2018-2022 L405 (NOT 2013-2017)?

Yes — these Range Rover L405 tail lights fit the LCI facelift L405 generation produced from 2018 through 2022 across every trim (Vogue, HSE, Autobiography, SVAutobiography, Fifty, Westminster, SVR, and SVAutobiography Dynamic). They are built on the original Land Rover tail light housing and use the original mounting points, the original factory connector, and the original gasket profile — so the install is a true direct-fit swap. The same Range Rover tail lights set works whether you are doing a standard Vogue swap, an SVAutobiography-inspired upgrade, or a Range Rover light upgrade on an SVR — same mounting, same plug, same functions. The pre-LCI L405 (2013-2017) uses a completely different tail light shape with a different LED signature — this listing is not compatible. The 2023+ L460 (5th-generation Range Rover) is also a completely different platform and is not compatible with this listing.

Will these Range Rover L405 tail lights fix the condensation issue?

Yes — that is one of the main reasons L405 owners upgrade to a handcrafted set in the first place. The factory Range Rover L405 tail light is prone to moisture, fogging, and standing water inside the lens as the factory seal ages — especially on LCI facelift units that have already been through a few winters. Every set of our Range Rover L405 tail lights is fully resealed at the factory joint with a professional-grade automotive sealant that does not shrink, harden, or fail with thermal cycling — so the moisture problem does not come back. We pressure-test every unit before it leaves the workshop.

Are these Range Rover L405 tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM Land Rover Range Rover L405 tail light cores, not aftermarket replica shells. The starting point is an original Land Rover tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line on a flagship Range Rover chassis — none of which a cheap aftermarket replica shell can replicate. Every competitor currently selling a Range Rover clear tail lights listing, a Range Rover smoked tail lights SKU, or any Range Rover custom taillights variant in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.

Will these Range Rover L405 tail lights work without coding?

Yes — on US-spec LCI L405 vehicles that came with the factory LED tail lamps, our Range Rover L405 tail lights install as a true direct plug-and-play replacement. The original connector pins line up, the lighting functions (running light, brake, turn signal, reverse, dynamic module if present) work the moment the harness is reconnected, and no SDD / Topix coding, no module adaptation, no module re-flashing, and no control-module swap is required. We have confirmed this across multiple LCI L405 builds where every lighting-related module reported zero fault codes after the install.