Infiniti Q60 CV37 Clear Black Venom Custom Taillights (2017-2022)

Description

Infiniti Q60 Tail Lights — Black Venom Style (CV37, 2017-2022)

Upgrade your 2017-2022 Infiniti Q60 (CV37 2-door coupe) with these handcrafted custom Infiniti Q60 tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner bezel. The result is a sharper, more modern look that transforms the rear of your Q60 luxury coupe while keeping a fully factory fit and finish. Looking for a true Infiniti Q60 CV37 tail lights build for your 2017-2022 coupe? Hunting for an Infiniti Q60 tail lights upgrade, Infiniti Q60 custom taillights, Infiniti Q60 Black Venom taillights, or genuine Infiniti Q60 clear tail lights on the CV37 platform? These Infiniti Q60 tail lights are built specifically for the CV37 generation (2017-2022) body style and cover every US trim from the base 2.0t through the high-performance Red Sport 400.

Why Choose Our Infiniti Q60 Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original Infiniti connectors, no coding, no module adaptation, no CAN-BUS error, and no extra wiring required on US-spec Q60 vehicles equipped with the factory LED tail lamps. Just unplug the factory harness and bolt the new tail lights back in.
• OEM Core Base — Built on original used Infiniti tail light housings, not cheap aftermarket replica shells. That means factory-accurate mounting geometry, original gasket profiles, and a clean OE appearance from the inside out — none of which a cheap aftermarket shell can replicate on a flagship Q60 coupe.
• Infiniti Q60 Smoked Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior is exactly the Infiniti Q60 Black Venom taillights look Q60 owners want — sharper, more modern, premium rear-end styling that pairs perfectly with the CV37’s long-hood, short-deck coupe proportions and flowing roofline.
• Fits All Trims (Red Sport 400 Included) — Built on the same OEM tail light housing used across every Q60 variant — 2.0t, 3.0t Luxe, 3.0t Pure, and the high-performance 3.0t Red Sport 400. One fitment covers the entire CV37 Q60 lineup.
• Factory Seal Quality — Each unit is pressure-tested and visually inspected before shipping to prevent moisture, fogging, or condensation.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

Looking for Infiniti Q60 clear tail lights or a true Infiniti Q60 tail lights upgrade on your 2017-2022 build? These modified Infiniti Q60 tail lights are designed to fit:

• Infiniti Q60 CV37 — 2017, 2018, 2019, 2020, 2021, 2022 — 2.0t, 3.0t Luxe, 3.0t Pure, Red Sport 400
• Body style: 2-door luxury coupe
• Plug type: US / EU / CN / JDM versions have different connectors — please confirm your market version with us before shipping so we send the correct harness.

Important — Please confirm before ordering:

• This listing fits the CV37 Q60 (2017-2022) only. The Q60 is the 2-door coupe — this listing is not for the Q50 sedan (different tail light housing entirely).
• Earlier G37 Coupe (2008-2013, V36 platform) uses a completely different tail light housing and is not compatible with this listing.
• Plug type varies by region (US / EU / CN / JDM). Confirm your market version before ordering so we ship the correct connector.

Infiniti Q60 Tail Lights Installation

Our Infiniti Q60 tail light upgrade is designed for a hassle-free installation. The process takes roughly 30-60 minutes per side with basic hand tools:

1. Open the trunk and remove the side trunk trim panels to expose the tail light mounting bolts.
2. Unplug the factory harness connector and remove the mounting bolts / nuts.
3. Carefully pull the OEM tail light straight out of the body.
4. Transfer any region-specific bulb holders / control modules to the new housings if applicable.
5. Seat the new Infiniti Q60 tail light, reinstall the bolts, reconnect the harness, and test all functions (running light, brake, turn signal, reverse) before reassembling the trim panels.

No coding, no module adaptation, and no wire splicing is required on US-spec Q60 vehicles that came with the factory LED tail lamps. The body control module recognizes the original LED load profile and flags zero fault codes out of the box.

Quality Promise

Each pair of Infiniti Q60 CV37 tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. Every Infiniti Q60 tail light we ship has been pressure-tested and visually inspected before it leaves our workshop, so the Infiniti Q60 tail lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit, and guarantee function.

FAQ – Frequently Asked Questions

Will these Infiniti Q60 tail lights trigger error codes or need extra wiring?

No error codes, and no extra wiring required on US-spec Q60 vehicles that came with the factory LED tail lamps. Because we build on the original Infiniti LED driver board, the body control module sees the exact same load profile as the factory LED tail light, so there is no bulb-out warning, no CAN-BUS fault, and no LED failure DTC. The lighting functions (running light, brake, turn signal, reverse) all work the moment the harness is reconnected. No inline resistors, no error-canceling modules, no extra wiring harness — just unplug the factory connector and plug it into the new housings and the lights work as if they came from the factory.

Are these Infiniti Q60 tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM Infiniti Q60 tail light cores, not aftermarket replica shells. The starting point is an original Infiniti tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line on a flagship Q60 coupe — none of which a cheap aftermarket replica shell can replicate. Every competitor currently selling an Infiniti Q60 clear tail lights, an Infiniti Q60 Black Venom taillights SKU, or any Infiniti Q60 custom taillights listing in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.

Do these Infiniti Q60 tail lights fit all trims (Red Sport 400 included)?

Yes — these Infiniti Q60 tail lights fit every CV37 Q60 trim (2017-2022) including the base 2.0t, the mid-trim 3.0t Luxe, the entry-turbo 3.0t Pure, and the high-performance Red Sport 400 with the 3.0t twin-turbo V6. All Q60 variants share the same outer tail light housing shape, the same factory connector, and the same mounting points — only the internal LED module varies by trim, and we preserve the factory module on every set. The same Infiniti Q60 tail lights set works whether you are doing a standard 2.0t swap, an Infiniti Q60 tail lights upgrade on a 3.0t Luxe build, or a full Infiniti Q60 custom taillights conversion on the Red Sport 400 flagship — same mounting, same plug, same functions. One fitment covers the entire CV37 Q60 lineup including the Red Sport 400.