Audi A6 / S6 C7 Sedan Clear Black Venom Custom Taillights (2011-2018)

Description

Audi A6 C7 Tail Lights — Black Venom Style (Sedan, 2011-2018)

Upgrade your 2011-2018 Audi A6 / S6 C7 Sedan with these handcrafted custom Audi A6 C7 tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner housing. The result is a sharper, more modern look that transforms the rear of your C7 sedan while keeping a fully factory fit and finish. These Audi A6 C7 tail lights — equally suitable as Audi S6 C7 tail light upgrades for owners who want a unified look across the C7 lineup — are built specifically for the C7-platform 4-door Sedan body style and are not compatible with the Avant (wagon) variant.

Why Choose Our Audi A6 C7 Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original connectors, no wiring or VCDS coding required on US-version C7 vehicles equipped with the factory LED tail lamps.
• OEM Core Base — Built on original used Audi tail light housings, not cheap aftermarket replica shells. This guarantees factory-accurate fitment, original seal geometry, and a clean OE appearance from the inside out.
• Audi A6 C7 Black Tail Lights Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior creates a premium OEM-plus look that pairs perfectly with the C7’s sharp body lines, giving your A6 the same aggressive rear presence that Audi A6 C7 Black tail lights are known for.
• Factory Seal Quality — Each unit is re-sealed with professional-grade automotive sealant, pressure-tested, and inspected before shipping to prevent moisture, fogging, or condensation.
• Sequential Turn Signal Ready — Compatible with the factory dynamic / sequential turn signal module on C7 vehicles originally equipped with it.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

Looking for Audi A6 C7 clear tail lights that keep the original Audi factory appearance but add a sharper, blackout-themed rear end? These modified Audi A6 C7 tail lights are designed to fit:

• Body style: Audi A6 / S6 C7 Sedan (4-door) — 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
• Models covered: A6 2.0T, A6 3.0T, A6 3.0 TDI, A6 3.0 Supercharged, S6 4.0T
• Facelift compatibility: Fits both pre-facelift (2011-2014) and facelift (2015-2018) C7 sedan tail light housings.

Important — Please confirm before ordering:

• This listing is for the C7 Sedan (4-door) only. It is not compatible with the C7 Avant (wagon) — Avant tail lights have a different mounting bracket, connector position, and overall lens shape.
• Plug type varies by region (US / EU / CN). Please confirm your market version with us before shipping so we send the correct connector.

Audi A6 C7 Tail Lights Installation

Our Audi A6 C7 tail light upgrade is designed for a hassle-free installation. The process takes roughly 30-60 minutes per side with basic hand tools:

1. Remove the rear trunk lining access panels to expose the tail light mounting nuts.
2. Unplug the factory harness connector and remove the two mounting bolts.
3. Carefully pull the OEM tail light out of the body.
4. Transfer any region-specific bulb holders / control modules to the new housings if applicable.
5. Seat the new Audi A6 C7 tail light, reinstall the bolts, reconnect the harness, and test all functions (running, brake, turn signal, reverse) before reassembling the trunk trim.

No coding, no VCDS adaptation, and no wire splicing is required on US-spec C7 vehicles that came with the factory LED tail lamps. Plug the harness in and the lights work as intended.

Quality Promise

Each pair of Audi A6 C7 tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. We pressure-test every sealed unit and visually inspect every finished lens before it leaves our workshop, so the lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit, and guarantee function.

FAQ – Frequently Asked Questions

Will these Audi A6 C7 tail lights work without VCDS coding?

Yes — on US-spec C7 vehicles that came with the factory LED tail lamps, our Audi A6 C7 tail lights install as a true direct plug-and-play replacement. The original connector pins line up, the lighting functions (running light, brake, turn signal, reverse) work the moment the harness is reconnected, and no VCDS long-coding, adaptation channel changes, or control module re-flashing is required. We have confirmed this against real Ross-Tech VCDS logs from a 2016 A6 3.0T sedan build, where every lighting module reported zero fault codes after the swap.

Are these Audi A6 C7 tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM Audi A6 C7 tail light cores, not aftermarket replica shells. The starting point is an original Audi tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line — none of which a cheap aftermarket shell can replicate. Every competitor currently selling an “Audi A6 C7 clear tail light” in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.

Will these Audi A6 C7 tail lights trigger any error codes or bulb-out warnings on the dashboard?

No bulb-out warnings or dashboard error messages on US-spec C7 vehicles. Because we build on the original Audi LED driver board, the car sees the exact same load profile as the factory LED tail light, so the body control module does not flag a cold-bulb check, cornering-light fault, or LED failure DTC. We verified this on a 2017 A6 3.0T with a Ross-Tech VCDS auto-scan after the install — every lighting-related module came back with zero fault codes, no adaptation required, and no entries in the fault memory.

Are these Audi A6 C7 tail lights truly plug and play?

Yes — they are designed to be a direct-fit, plug-and-play upgrade. The connectors are the original Audi plug types, the mounting bolt positions match the factory holes, and the gasket profile lines up with the body. There is no wire cutting, no wire splicing, no pin re-pinning, and no extra wiring harness required to make them work. As long as your C7 is a US-spec sedan originally equipped with LED tail lamps, the install is bolt off, swap, bolt on, reconnect. This applies to every Audi A6 C7 clear tail lights order that ships out of our workshop.