Chevrolet Camaro 6th Gen Clear Black Venom Custom Taillights (2016-2018 Pre-Facelift)

Description

Camaro Tail Lights — Black Venom Style (6th Gen, 2016-2018 Pre-Facelift)

Upgrade your 2016-2018 Chevrolet Camaro 6th Gen with these handcrafted custom Camaro tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner bezel. The result is a sharper, more modern look that transforms the rear of your muscle car while keeping a fully factory fit and finish. Looking for a Camaro tail light upgrade or a true Camaro plug and play tail lights set for your 6th Gen? Hunting for Camaro smoked tail lights, Camaro custom taillights, or genuine Camaro clear tail lights on the pre-facelift Camaro? These Camaro tail lights are built specifically for the 6th-generation pre-facelift Camaro (2016-2018) and are not compatible with the 2019+ facelift model.

Why Choose Our Camaro Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original Chevrolet connectors, no coding, no module adaptation, and no wire splicing required on US-spec Camaro vehicles equipped with the factory LED tail lamps. The factory harness plugs straight in and every function (running light, brake, turn signal, reverse) works immediately.
• No Hyperflash, No Error Codes — Because we build on the original GM LED driver board, the body control module sees the exact same load profile as the factory LED tail light, so there is no bulb-out warning, no hyperflash on the turn signals, and no LED failure DTC. The lights just work as if they came from the factory.
• OEM Core Base — Built on original used Chevrolet Camaro tail light housings, not cheap aftermarket replica shells. That means factory-accurate mounting geometry, original gasket profiles, and a clean OE appearance from the inside out — none of which a cheap aftermarket shell can replicate on a 6th-gen Camaro chassis.
• Camaro Smoked Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior is exactly the Camaro smoked tail lights look 6th Gen Camaro owners want — sharper, more aggressive, premium rear-end styling that pairs perfectly with the muscle car’s wide, low proportions and aggressive stance.
• Factory Seal Quality — Each unit is pressure-tested and visually inspected before shipping to prevent moisture, fogging, or condensation.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

Looking for Camaro clear tail lights or a Camaro plug and play tail lights swap on your 2016-2018 build? Need a Camaro tail light upgrade that drops straight in? These modified Camaro tail lights are designed to fit:

• Chevrolet Camaro 6th Gen (Pre-Facelift) — 2016, 2017, 2018 — LS, LT, LT1, SS (with factory LED tail lamps)
• Body style: 2-door coupe and convertible
• Plug type: US-spec connector (the Camaro is a US-only model).

Important — Please confirm before ordering:

• This listing fits the 6th-generation pre-facelift Camaro (2016-2018) only. The 2019+ facelift Camaro uses a completely different tail light shape with a new LED signature and is not compatible with this listing.
• Halogen-equipped Camaros are NOT supported. The base LS trim was available with halogen tail lamps in some markets — those use a different housing and a different pinout. This listing is only for Camaros that came with the factory LED tail lamps from the factory. If your Camaro has halogen tail lamps, please message us first.
• Earlier 5th-generation Camaro (2010-2015) tail lights are a completely different shape and are also not compatible with this listing.
• The Camaro is a US-only model. If you are outside North America, please message us first to confirm we can source a tail light core for your build.

Camaro Tail Lights Installation

Our Camaro tail lights set is designed for a hassle-free installation. The process takes roughly 30-60 minutes per side with basic hand tools:

1. Open the trunk and remove the side trunk trim panels to expose the tail light mounting bolts.
2. Unplug the factory harness connector and remove the mounting bolts / nuts.
3. Carefully pull the OEM tail light straight out of the body.
4. Transfer any region-specific bulb holders / control modules to the new housings if applicable.
5. Seat the new Camaro tail light, reinstall the bolts, reconnect the harness, and test all functions (running light, brake, turn signal, reverse) before reassembling the trim panels.

No coding, no module adaptation, and no wire splicing is required on US-spec Camaro vehicles that came with the factory LED tail lamps. The body control module recognizes the original LED load profile and flags zero fault codes out of the box.

Quality Promise

Each pair of Camaro tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. Every Camaro tail light we ship has been pressure-tested and visually inspected before it leaves our workshop, so the Camaro tail lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit, and guarantee function.

FAQ – Frequently Asked Questions

Will these Camaro tail lights fit my 2016-2018 Camaro (NOT 2019+)?

Yes — these Camaro tail lights fit the 6th-generation pre-facelift Camaro produced from 2016 through 2018 across every trim (LS, LT, LT1, and SS) that originally came with the factory LED tail lamps. They are built on the original Chevrolet tail light housing and use the original mounting points, the original factory connector, and the original gasket profile — so the install is a true Camaro plug and play tail lights direct-fit swap. The same set works for a standard Camaro tail light upgrade on a base LT or a full Camaro tail light upgrade on an SS — same mounting, same plug, same functions. The 2019+ facelift Camaro uses a completely different tail light shape with a new LED signature and is not compatible with this listing. Earlier 5th-generation Camaro (2010-2015) tail lights are also a completely different shape and are not compatible with this listing.

Will these Camaro tail lights trigger error codes or hyperflash?

No error codes, and no hyperflash on US-spec Camaro vehicles that came with the factory LED tail lamps. Because we build on the original GM LED driver board, the body control module sees the exact same load profile as the factory LED tail light, so there is no bulb-out warning, no hyperflash on the turn signals, and no LED failure DTC. The lighting functions (running light, brake, turn signal, reverse) all work the moment the harness is reconnected. No inline resistors, no error-canceling modules, no extra wiring harness — just plug the factory connector back in and the lights work as if they came from the factory.

Do these Camaro tail lights fit halogen-equipped Camaros?

No — these Camaro tail lights are built specifically for Camaros that originally came with the factory LED tail lamps. The base LS trim in some markets was available with halogen tail lamps, and those use a different tail light housing, a different connector, and a different pinout. Halogen-equipped Camaros require a different handcrafted set that we can build on request — please message us with your build details before ordering. This listing covers LED-equipped 2016-2018 Camaros only (LT, LT1, SS, and LS with the LED option).

Are these Camaro tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM Chevrolet Camaro tail light cores, not aftermarket replica shells. The starting point is an original Chevrolet tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line on a 6th-gen Camaro chassis — none of which a cheap aftermarket replica shell can replicate. Every competitor currently selling a Camaro clear tail light, a Camaro smoked tail lights SKU, or any Camaro custom taillights listing in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.