Nissan Quest R52 Clear Black Venom Custom Taillights (2012-2017)

Description

Nissan Quest Tail Lights — Black Venom Style (R52, 2012-2017)

Upgrade your 2012-2017 Nissan Quest minivan with these handcrafted custom Nissan Quest tail lights. Each set is meticulously modified from genuine OEM used tail light cores, then upgraded to an aggressive Black Venom style with a crystal-clear lens paired with a deep black inner bezel. The result is a sharper, more modern look that transforms the rear of your Quest minivan while keeping a fully factory fit and finish. Looking for Nissan Quest clear tail lights or a true Nissan Quest custom taillights build for your minivan? Searching for a clean Nissan Quest tail light upgrade that does not look like every other eBay listing? These Nissan Quest tail lights are built specifically for the 4th-generation R52 (2012-2017) body style and fit every US-spec trim from the base S up through the Platinum.

Why Choose Our Nissan Quest Custom Tail Lights

• 100% Plug & Play — Direct fit on the original mounting points and original Nissan connectors, no coding, no module adaptation, and no wire splicing required on US-spec Quest vehicles equipped with the factory tail lamps. The reverse / turn / brake functions all run on standard 7443 / 3157 sockets that drop straight into the OEM harness.
• OEM Core Base — Built on original used Nissan tail light housings, not cheap aftermarket replica shells. That means factory-accurate mounting geometry, original gasket profiles, and a clean OE appearance from the inside out — none of which a cheap aftermarket shell can replicate.
• Fixes the Factory Condensation Problem — Stock R52 Quest tail lights are one of the most commonly replaced tail lights on Parts Avenue’s replacement-reason list, and the #1 reason owners swap is moisture / condensation inside the lens. Our handcrafted Nissan Quest tail lights are fully resealed with a professional-grade automotive sealant that does not shrink, harden, or fail with thermal cycling — so the foggy-lens problem does not come back on our set.
• Nissan Quest Black Venom Tail Lights Look — Crystal-clear outer lens paired with a deep black inner bezel. The blackout interior is exactly the Nissan Quest Black Venom tail lights look Quest owners want — modern, premium, and aggressive in a way that stock red-lens replacements cannot match.
• Fits All US Trims — Built on the same OEM tail light housing used across every US-spec R52 Quest trim — S, SV, SL, LE, and Platinum. One fitment covers the entire 4th-generation Quest lineup.
• Factory Seal Quality — Each unit is pressure-tested and visually inspected before shipping to prevent moisture, fogging, or condensation.
• 1-Year Warranty — Covers manufacturing defects only. Does not cover damage from accidents, improper installation, or unauthorized modifications.

Compatibility

These modified Nissan Quest tail lights are designed to fit:

• Nissan Quest R52 (4th Generation) — 2012, 2013, 2014, 2015, 2016, 2017 — S, SV, SL, LE, Platinum
• Body style: 4-door minivan (US-only model)
• Plug type: US-spec connector only (the Nissan Quest was never officially sold outside North America). All US trims use the same factory tail light connector.

Important — Please confirm before ordering:

• This listing fits the 4th-generation R52 Quest (2012-2017) only. Earlier V40 (1993-2002) and V42 (2004-2009) and RE00 (2010-2011) generations use a different tail light shape and are not compatible with this listing.
• The 2012-2017 R52 uses the same tail light housing across every US trim (S, SV, SL, LE, Platinum), so one fitment covers all five trims.
• The Nissan Quest was sold in the US only. If you are outside North America, please message us first to confirm we can source a tail light core for your build.

Nissan Quest Tail Lights Installation

Our Nissan Quest tail light upgrade is designed for a hassle-free installation. The process takes roughly 20-40 minutes per side with basic hand tools:

1. Open the rear hatch and remove the small access panel in the cargo area to expose the tail light mounting bolts.
2. Unplug the factory harness connector and remove the mounting bolts / nuts.
3. Carefully pull the OEM tail light straight out of the body.
4. Transfer any region-specific bulb holders (the 7443 / 3157 sockets drop straight into the new housings) to the new assembly.
5. Seat the new Nissan Quest tail light, reinstall the bolts, reconnect the harness, and test all functions (running light, brake, turn signal, reverse) before reassembling the access panel.

No coding, no module adaptation, and no wire splicing is required on US-spec Quest vehicles. The body control module recognizes the original load profile and flags zero fault codes out of the box.

Quality Promise

Each pair of Nissan Quest tail lights is hand-assembled by experienced craftsmen using only original OEM tail light cores. We pressure-test every sealed unit and visually inspect every finished lens before it leaves our workshop, so the lights arrive ready to install and built to last.

Important Note — Please Read Before Purchase: Each set is handcrafted from genuine USED OEM tail light cores (not new aftermarket shells, not replicas). Because every used core starts with different wear patterns, age-related micro-scratches, slight color variations, and minor cosmetic differences from years of prior use, no two sets are exactly identical. Slight variations in housing tone, internal finish, surface patina, or material aging are inherent to the handmade, used-core nature of our product — these are not quality defects and not grounds for return or refund. We pre-inspect every core, seal every unit with professional-grade sealant, and guarantee function.

FAQ – Frequently Asked Questions

Will these Nissan Quest tail lights fit my 2012-2017 Nissan Quest?

Yes — these Nissan Quest tail lights fit the 4th-generation R52 (2012-2017) across every US-spec trim (S, SV, SL, LE, and Platinum). They are built on the original Nissan tail light housing and use the original Nissan mounting points, the original factory connector, and the original gasket profile — so the install is a true direct-fit swap. The R52 generation shared the same rear tail light aperture across all trims, so one fitment covers the entire 4th-generation Quest lineup. The 2010-2011 model year was a transitional model between the 3rd and 4th generation and used a different tail light shape — this listing is not compatible. Earlier 3rd-generation (V42, 2004-2009) and 2nd-generation (V40, 1993-2002) Quests are also not compatible.

Are these Nissan Quest tail lights made from OEM cores or aftermarket shells?

These are built on genuine used OEM Nissan Quest tail light cores, not aftermarket replica shells. The starting point is an original Nissan tail light housing pulled from a low-mileage vehicle, which we then disassemble, refinish in the Black Venom blackout treatment, re-lens, and re-seal by hand. That is what gives you factory-accurate mounting geometry, original gasket profiles, and a perfectly flush body line — none of which a cheap aftermarket replica shell can replicate. Every competitor currently selling a Nissan Quest clear tail light, a Nissan Quest Black Venom tail lights listing, or any Nissan Quest custom taillights SKU in this price range is doing the same thing on real OEM cores, but almost none of them publish the actual core-sourcing process. We do.

Will these Nissan Quest tail lights fix the condensation problem?

Yes — and that is one of the most common reasons Quest owners end up shopping for a Nissan Quest tail light upgrade in the first place. The factory R52 Quest tail light is sealed with an OEM butyl rubber gasket that hardens and shrinks with age, which is the well-documented cause of moisture, fogging, and standing water inside the lens that you see listed on Parts Avenue as one of the top replacement triggers for the Quest. Every set of our Nissan Quest tail lights — including our Nissan Quest clear tail lights and Nissan Quest Black Venom tail lights SKUs — is resealed at the factory joint with a professional-grade automotive sealant that does not shrink, harden, or fail with thermal cycling. We pressure-test every unit before it leaves the workshop.

Do these Nissan Quest tail lights work with my Quest’s factory wiring?

Yes — these Nissan Quest tail lights are designed to work with the factory Nissan wiring harness with no modifications. The OEM Nissan connector on the back of the housing is the same one your Quest left the factory with, and the standard 7443 / 3157 sockets for the reverse, turn, and brake functions drop straight into the new housings. We have confirmed this against the Diode Dynamics 7443 direct-fit reference for the R52 Quest — every reverse, brake, and turn function works the moment the harness is reconnected, with no inline resistors, no error-canceling modules, and no extra wiring harness required.